Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: kagliostro on September 24, 2022, 01:52:57 am

Title: Visio file created in inch, is possible to convert in mm ?
Post by: kagliostro on September 24, 2022, 01:52:57 am

(if this is the wrong board, please move the thread)

I would like to know if is possible to convert a .vsd (Visio file) created in inch to mm

I tried to set mm on the unit of measure and despite seems that the change is accepted if I use the measure tools the measures are shown in inch  :w2: :dontknow: :dontknow: :dontknow: :w2:

Many Thanks for any help

Franco

Title: Re: Visio file created in inch, is possible to convert in mm ?
Post by: sluckey on September 24, 2022, 03:39:49 am

Drop a dimensions shape on the drawing. Select it. Right click. Select "Precision and Units". Click on the Units drop down list. Now select "Use Drawing Page's units" or scroll down the list to select "millimeters".

Title: Re: Visio file created in inch, is possible to convert in mm ?
Post by: kagliostro on September 24, 2022, 04:48:29 am

Ciao Steve

I followed your instruction, saved the dimension shape with the new parameters and ....

I tried it and all is fine  :thumbsup:

Many Thanks

Franco