Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => DIY Layout Creator and Custom Boards => Topic started by: VertigoCycles on November 10, 2022, 03:42:11 pm

Title: DIYLC and the Mac M1 chip
Post by: VertigoCycles on November 10, 2022, 03:42:11 pm

Has anyone been able to run DIYLC on an M1 Mac with a native Java installation (not in intel compatibility mode)? 

Bane has made a few versions, but I can't get any of them to run.  I've given explicit permission in the security section as well with no luck.

Title: Re: DIYLC and the Mac M1 chip
Post by: Blueboozer on November 10, 2022, 10:09:10 pm

I’m running it on my Studio M1 Max. Nothing special, just installed and ran

Title: Re: DIYLC and the Mac M1 chip
Post by: EL34 on November 11, 2022, 07:16:31 am

I don't know anything about Mac's
I see you posted on GitHub


That's probably your best bet for help on that.

Title: Re: DIYLC and the Mac M1 chip
Post by: Lectroid on November 11, 2022, 02:20:58 pm

MacBook Pro running Ventura as of last night.  Only a couple of glitches over the years and he fixed them near-instantly.  Impressive.

There's a technique to open first time: go to Finder - Applications, right click, "Open".   I assume you've tried that.

Just tried mine again and it opens fine on macOS 13.0.  Good luck.