Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Jonas on January 25, 2023, 08:13:57 pm

Title: BADCAT CUB II REVERB - NEED SCHEMATIC
Post by: Jonas on January 25, 2023, 08:13:57 pm

Hi - I have a Badcat Cub II with reverb in the shop and looking for a schematic. Any one know where I can get the schematic?

Title: Re: BADCAT CUB II REVERB - NEED SCHEMATIC
Post by: tubeswell on January 25, 2023, 08:17:28 pm

Try over at Music Electronics Forum

Title: Re: BADCAT CUB II REVERB - NEED SCHEMATIC
Post by: Latole on January 26, 2023, 03:37:13 am

 Is it same as Badcat Cub II R 15 ?
R for Reverb ?

Can't find one in 15 minutes search
Good luck

Tubeswell ; https://music-electronics-forum.com


https://el34world.com/Forum/index.php?topic=17727.0

Chassis like this one  ? https://reverb.com/item/4857794-bad-cat-cub-ii-custom-shop-2007-grey-white

Title: Re: BADCAT CUB II REVERB - NEED SCHEMATIC
Post by: Jonas on January 26, 2023, 07:26:56 am

I could not find one either, but yes this one has reverb.

It looks to be the legacy version shown

(http://)

Title: Re: BADCAT CUB II REVERB - NEED SCHEMATIC
Post by: SILVERGUN on January 26, 2023, 07:40:31 am

It doesn't take a schematic to fix a hand wired tube amp. I'm not saying they aren't helpful, just not always necessary. They mostly do the same things based around very similar parameters.If you can give a solid complaint, all voltages for all tubes and plenty of hi-rez gut shots, you are surrounded by plenty of talented guys who have helped to fix plenty of amps from thousands of miles away.

Title: Re: BADCAT CUB II REVERB - NEED SCHEMATIC
Post by: Latole on January 26, 2023, 08:42:49 am

Schematic is very useful and a must here as we can't see the amp.
But if it is not available, we should work without it .