Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => EZ Board postings => Topic started by: Geezer on June 18, 2005, 05:53:00 am
-
Hoffman Amplifiers
> Tube Amp Building - Tweaks - Repairs
> Fender M-500 monitor amp schematic or resistor values
<< Prev Topic | Next Topic >>
Author Comment
JerryFJA
Junior tube assistant
Posts: 15
(3/30/04 10:22 am)
Fender M-500 monitor amp schematic or resistor values
--------------------------------------------------------------------------------
I'm need a schematic for a Fender M-500 monitor power amp. I have one here with a couple burnt resistors and need to know their values. They're R25 & R36 if anyone has a schematic.
Thanks,
Jerry
FJAMods@aol.com
6G6
Junior tube assistant
Posts: 148
(3/31/04 9:13 am)
Re: Fender M-500 monitor amp schematic or resistor values
--------------------------------------------------------------------------------
You might be able to ask Fender.
A better question would be; what caused them to burn?
If you don't find the answer to that one, the next ones will fry as well.
<< Prev Topic | Next Topic >>
Topic Commands
Click to receive email notification of replies
jump to: Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)
- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -
Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.