Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Planobilly on August 08, 2023, 08:12:20 pm

Title: Finishing up on Supro and need a little help
Post by: Planobilly on August 08, 2023, 08:12:20 pm

Hi,

First, using a Cliff jack on the input, is this correct?

(https://i.imgur.com/zL0BUcb.jpg)

Second, how would the foot switch jack be wired using a Cliff jack.

(https://i.imgur.com/tcBBjtc.jpg)

(https://i.imgur.com/cllX10j.jpg)

Thanks,

Billy

Title: Re: Finishing up on Supro and need a little help
Post by: sluckey on August 08, 2023, 08:59:50 pm

Input is correct.

Title: Re: Finishing up on Supro and need a little help
Post by: Planobilly on August 08, 2023, 09:40:30 pm

Thanks there Mr. Steve. I am not sure why Cliff jack always confuse me! I will go change the jack wiring. The switch is coming Friday.

Things got built a bit different than yours. Not on purpose, just happened that way. We will see if it causes any issues.

(https://i.imgur.com/Mv38AxI.jpg)

Thanks,

Billy