Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: paulcblais on September 16, 2023, 01:10:44 pm

Title: Revibe Idea, 3ft reverb tank
Post by: paulcblais on September 16, 2023, 01:10:44 pm

All, just came into possession of a 3 ft reverb tank and transformer from a tone cabinet. Considering using the revibe board and circuit and creating a 12"x12" 4 ft tall pillar for a standalone reverb. Has this been done before? Any issues I'm not thinking of? I'm guessing it's such an off the wall idea that it really hasn't been done before. What am i missing?
Paul

Title: Re: Revibe Idea, 3ft reverb tank
Post by: Dave on September 16, 2023, 01:28:45 pm

I might build the circuit and whatnot. Mock up the reverb tank and play through it a while and see if there is anything about it that I like so much more than a standard tank that it would justify the use of that monstrosity. If it does, then by all means.


Dave

Title: Re: Revibe Idea, 3ft reverb tank
Post by: Williamblake on September 17, 2023, 06:17:21 am

I am really curious about the reverb tank. Any chance you could share some pictures or share more info? Input and output DC resistance, number of springs, colour of coils, manufacturer.