Hoffman Amplifiers Tube Amplifier Forum

Other Stuff => Effects => Topic started by: TIMBO on September 26, 2023, 02:36:25 pm

Title: Simple DIY Reverb
Post by: TIMBO on September 26, 2023, 02:36:25 pm

Hey guys, Looking for a low part simple reverb that can be built on a Vero board.

Title: Re: Simple DIY Reverb
Post by: Lectroid on September 26, 2023, 03:24:07 pm

Have you looked through the one-tube reverb resources in the Archived topics board?  tubenit started this one but lots of people joined in.

https://el34world.com/Forum/index.php?topic=7957.0 (https://el34world.com/Forum/index.php?topic=7957.0)

Title: Re: Simple DIY Reverb
Post by: TIMBO on September 27, 2023, 02:27:22 am

Hey mate,
I was looking for a SS circuit, There is a few out there that use the Belton brick with IC to drive it.
I wanted to go simplier than that.
The PT2399 seam to be able to do the job but I know nothin about this stuff

Title: Re: Simple DIY Reverb
Post by: TIMBO on September 27, 2023, 02:53:08 am

Something like this
PT2399 Guitar Reverb Circuit Board Component Layout (petervis.com) (https://www.petervis.com/guitar-circuits/pt2399/circuit-board-component-layout.html)

Title: Re: Simple DIY Reverb
Post by: RadioComm on October 15, 2023, 08:08:00 am

Sorry Timbo if I'm too late...

Rob Robinette has an interesting page on adding reverb which includes SS:

https://robrobinette.com/Compact_Reverb.htm

Take care everyone.

Title: Re: Simple DIY Reverb
Post by: mresistor on October 15, 2023, 10:33:47 am

HI Timbo  there's this I ran across   https://www.tdpri.com/threads/solid-state-spring-tank-reverb-circuit.614834/ (https://www.tdpri.com/threads/solid-state-spring-tank-reverb-circuit.614834/)


but I see you're wanting a non-tank SS reverb, in that case what you posted looks pretty simple

Title: Re: Simple DIY Reverb
Post by: TIMBO on December 19, 2023, 05:31:03 pm

Hey guys, The belton brick is a definite winner when it comes the SS reverb.
So the simple DIY reverb is a Buying a pedal kit.
(https://i.imgur.com/SFrsfee.jpg?1)
(https://i.imgur.com/tPHdW92.jpg?1)
From pedal parts Australia (Guitar PCB Add-verb)
All up about $60
Add-Verb v1.5 - Best Reverb PCB - GuitarPCB (https://guitarpcb.com/product/add-verb-traditional-amp-style/)

Title: Re: Simple DIY Reverb
Post by: TIMBO on January 05, 2024, 08:23:43 pm

Hey guys, This one is sorted.
A "Addverb" PCB and components from Pedal Parts Australia.
Esay as..
(https://i.imgur.com/gCOp3kB.jpg?1)
(https://i.imgur.com/TS1gCuj.jpg)
Simple PSU for regulated 9vdc
I injected in a SE EL84 amp between the wiper of the Treble pot and the input of the master volume pot
Works a treat