Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: joesatch on October 08, 2023, 12:12:47 am

Title: CAE 3+ output stage assistance
Post by: joesatch on October 08, 2023, 12:12:47 am

preamp build. Level is too low on this output stage.  How can i get it louder? What will R40 changed to 1.5k do?  There is a discussion on this being the wrong value in the schematic.

Title: Re: CAE 3+ output stage assistance
Post by: PRR on October 08, 2023, 12:24:14 am

Quote from: joesatch on October 08, 2023, 12:12:47 am

...There is a discussion on....

Where?

Do you understand "cathode follower"?

Title: Re: CAE 3+ output stage assistance
Post by: PRR on October 08, 2023, 12:31:08 am

I figured what you are talking about.

Title: Re: CAE 3+ output stage assistance
Post by: joesatch on October 08, 2023, 02:29:45 am

problem solved.i had a 680k instead of a 680R resistor in there.  :l2: