Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: guitardude57 on November 01, 2023, 02:33:09 pm

Title: Modeling tube power amp ideas
Post by: guitardude57 on November 01, 2023, 02:33:09 pm

Howdy all!





Looking to build a mono tube amp with hi/low inputs, input sensitivity pot, presence and master volume.  No tone controls.
6L6/5881 power.
Will be built in a Stout chassis.


Potentially, (with larger chassis) could be done as a stereo amp, later.




Thanks!

Title: Re: Modeling tube power amp ideas
Post by: kagliostro on November 02, 2023, 01:33:49 am

Guitar - HiFun - HiFi

Which of those ?

Franco

Title: Re: Modeling tube power amp ideas
Post by: guitardude57 on November 05, 2023, 12:35:16 pm

Quote from: kagliostro on November 02, 2023, 01:33:49 am

Guitar - HiFun - HiFi

Which of those ?

Franco

For Guitar only.  Will do a mono setup first, a 12” combo with a tube power amp to use with Kemper/Headrush/Helix… etc.

Title: Re: Modeling tube power amp ideas
Post by: Esquirefreak on November 05, 2023, 01:22:23 pm

I'd probably build start with something like the AB763 PI and power amp. Further tweaking if necessary.

Either ~80w, ~40w or ~25w, depending on how loud you wanna play and your budget.

Of course, you also have the option of using a regular PA (tube or SS) power amp.

/Max

Title: Re: Modeling tube power amp ideas
Post by: guitardude57 on November 20, 2023, 04:01:17 am

Yes, a 6L6gc amp is pretty much what I had in mind.  Putting parts list together…
Thanks!