Hoffman Amplifiers Tube Amplifier Forum
Other Stuff => Solid State => Topic started by: ShoemanGB on April 14, 2024, 06:29:09 am
-
I'm getting a loud pop when I power down the Peavey Bandit. I've attached a snip of the PS. What should I be looking at as the cause?
-
> What should I be looking at
Usually the power amp. You cut that part off the image.
-
Thanks Paul, here's that section.
-
Did you find the issue ?
Sometime it is the On/Off switch's contact
-
It seems to have cured itself. Currently it is operating as a power amp for a Tech 21 PSA 2.0 quiet happily.