Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => EZ Board postings => Topic started by: Geezer on June 18, 2005, 05:58:51 am
-
Hoffman Amplifiers
> Tube Amp Building - Tweaks - Repairs
> floating heaters
<< Prev Topic | Next Topic >>
Author Comment
ganzonimx
Hey get your own solder
Posts: 445
(3/31/04 8:18 pm)
floating heaters
--------------------------------------------------------------------------------
I would like to use a bleeder resistor of the first filter cap to build the voltage divider to float the heaters. This way I would only use one additional resistor and one cap. Would that work?
Cris
Tiny Daddy
I will work on all amps
Posts: 582
(4/1/04 4:03 pm)
Re: floating heaters
--------------------------------------------------------------------------------
That should work.
ganzonimx
Hey get your own solder
Posts: 453
(4/1/04 5:09 pm)
Re: floating heaters
--------------------------------------------------------------------------------
OK, I'll go for it...
I...'m still miles away to pulgg in to this amp... mabe in May ore June...
Cris
Lucid Alice
Senior tube assistant
Posts: 185
(4/1/04 11:01 pm)
Re: floating heaters
--------------------------------------------------------------------------------
Neat idea! Should float at around 5% of B+?
<< Prev Topic | Next Topic >>
Topic Commands
Click to receive email notification of replies
jump to: Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)
- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -
Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.