Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: Esquirefreak on July 13, 2024, 06:27:45 am
-
I got one of these for dirt cheap recently. At first it did sound very anemic. But after playing it through a decent speaker cab I gotta say that it sounds quite nice and has enough dynamics to allow riding the guitars volume knob.
I have some 12" speakers laying around, but they're all 8Ω, rather than the original 16Ω speakers.
Do I have it right that using the AUX jack disconnects the 8Ω tap and it should be ok to use the AUX jack only?
/Max
-
the AUX jack disconnects the 8Ω tap and it should be ok to use the AUX jack only?
the AUX does disconnect the main speaker, however the AUX tap is 4 ohms, so you need 2 of your 12"-8ohms in parallel for 4 ohms
-
rather than the original 16Ω speakers.
your schematic shows the Main speaker tap IS 8ohms
-
Yeah, it's a 212 wired in parallel. So 2 8Ω speakers in parallel wired to the 4Ω tap is what I plan to use.
Thanks 👍
-
The complete schematic ;
https://doc-0g-9o-prod-02-apps-viewer.googleusercontent.com/viewer2/prod-02/pdf/59v5a97nb2nrhkophe474inbgkvb7rs2/es5tpc59s83ebs9pbor2ff35moljed8a/1721074125000/3/100117570300525426975/APznzaa_pnptCmbxpDMXLpDU1QiuX95E-UObxTY2l5epcoHOtJxCZLY2X6AriDiMG3hhoN4ufQkPFw8fvbDmgqklqP0trrrNAm6G0HjSwJCb4mpcG1gGj9XsASBrszTwsTtaPYbWnC_8SPpNU0pQhKKxIujsOcgvt6Pi-BRy5uYQ7G9XyLbnBbXNOozDPs6SqNXvBkQF9hHf4ez0iBVkAboBnjNN75YgOkqhIu9LAe94g3p6MYfRRhLnWw0b-erquhCk196gmLjN6MG0WwVsStuKAgVWUrnCu112Az36l6A1l-pdqJYQDow2dtTF-DleNrCh49RHdbcnimcbzPFXbXSAXtoGg9UzKmV5UQ02XnnP6J0ubSSMm1odDv5xOqh4IsCfpeuNdC-u?authuser=0&nonce=efnhmkbiuo0vg&user=100117570300525426975&hash=t2kuuhugf0oo9e0sd9bi2nkr2u60najg
Piictures and description ; https://irationaudio.com/2015/08/08/peavey-classic-vt/