Hoffman Amplifiers Tube Amplifier Forum
Other Stuff => Cabinets-Speakers => Topic started by: imgumby001 on July 16, 2024, 03:02:51 pm
-
Hello all!
I am modifying an old 4x10 to be a test bed for a plethora of 10” speakers I have. The cab in question will have 5 jacks and two switches. The four speakers will be wired to their individual jacks. Separate pairs will be wired to an on/off switch, and the switches will then be wired to what I’m calling a “unity” jack. Once plugged into the unity jack you can use the whole cab, or select an individual pair by switching one pair off. I’m attaching my poorly drawn proposed schematic for evaluation. Please let me know if this is making sense, or I’m off my rocker!!!
Thanks all,
NR