Hoffman Amplifiers Tube Amplifier Forum
Other Stuff => Buy - Sell - Trade => Topic started by: EL34 on January 05, 2025, 09:08:40 am
-
I am going through the shop and getting rid of items.
All items must be paid for via PayPal only.
I cannot process these items through the business on charge cards because they are not items I sell.
If you want any of the items below, Personal message me with the Item number.
I will send you a link to a form where you can enter your shipping address
I will need your PayPal email address so I can send you an invoice
USA shipping only via USPS Ground select or Priority mail
I cannot give shipping quotes because it will take up too much of my time
USPS ground select is the cheapest option and goes by ground.
USPS priority mail is more expensive and goes by air.
I am blowing these items out cheap
Many of these items go way back to the 1990's when my shop was in Florida
SOLD ITEMS WILL GET REMOVED TO FREE UP SPACE
-
Item #1 is a couple of meters
SOLD
-
Item #4
These are rather unique items
I used these device to make EL84 9 pin tube adapters to 8 pin sockets
so you could use EL84's in an amp that could handle EL84's
The round brass hoop held the 8 pin base while you threaded the 9 pin socket wires into the base.
There are hookup notes on the wooden base.
The wooden one has a 8 pin base hole and a 9 pin tube hole
I don't remember which one of these was used first or second
$2.00 for both of these items
-
Item #5
Guitar tuners
Not sure these tuners works or not?
Takes a 9 volt battery
$2.00 for both tuners
-
Item #6
Vox tube shields
I do remember taking these off of a Vox chassis that was modified
They are aluminum with captive screws that protected the power tubes.
$2.00 for these items
-
Item #7
SOLD
-
Item #8
SOLD
-
Item #9
SOLD
-
Item #10
SOLD
-
Item #12
Bag of 50 * amp slo-blo fuses
$1.00 for this item
-
Item #17
SOLD
-
Item #19
Fender rear face panel
Looks like a Black Face Princeton Reverb rear face plate to me
$10 for the face panel
-
Item #20
Fender Brass amp strips
These are off Vintage fenders but not sure what amps
These are the strips from behind the front panel
The long one is 17 1/2 inches
The short one is 16 1/4 inches long
$10 for both brass strips
-
Item #21
SOLD
-
Item #23
SOLD
-
Item #31
These are amp handles with 8 inch center to center bolt spacing's
I have a bag of 10 handles
They include the handles, the chrome end caps, the bolts and T-nuts
$10 for all 10 handles
-
Item #32
SOLD
-
Item #33
Power tube retainers
One type is the snap ring type as found on old Marshall tube sockets
The other type is a bolt down for 1 inch tube sockets
$1.00 for all of them
-
Item #34
Fender face plate for Mojo Twin Reverb chassis
Not sure if this fits vintage Fender chassis or not?
It's 24 3/8 inches long
Here's the link at Mojo for this faceplate
https://www.mojotone.com/Blackface-Twin-Reverb-Style-Faceplate-for-Mojotone-Chassis-No-Logo
$5 for this faceplate
-
Item #35
SOLD