Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => DIY Layout Creator and Custom Boards => Topic started by: Jonas Grumby on February 17, 2025, 07:47:02 pm

Title: How to make resistors look like resistors in DIYLC?
Post by: Jonas Grumby on February 17, 2025, 07:47:02 pm

Today is my first day using DIYLC. I’m working through a breadboard design of the EH Screaming Bird / Screaming Tree layout by Dcountry13. I wanted to know how to make my resistors look like resistors. I tried Color Code: 5 Band and 4 Band, and Shape: Tubular Beveled, but they just remain straight (red) lines. Also if you see anything wrong with this layout please let me know. Thanks!

Title: Re: How to make resistors look like resistors in DIYLC?
Post by: EL34 on February 18, 2025, 06:04:27 am

Your spacing's are too close
Make the attachment points further apart

Like this

Title: Re: How to make resistors look like resistors in DIYLC?
Post by: Jonas Grumby on February 18, 2025, 08:00:43 am

Thank you. It's working now. Possibly because yesterday I specified that they were .5W resistors and then changed the value to .25W. Today I re-drew them as .25W and it worked.