Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => EZ Board postings => Topic started by: Geezer on June 18, 2005, 06:04:13 am
-
Hoffman Amplifiers
> Tube Amp Building - Tweaks - Repairs
> Newbie Question - Combining Outputs
<< Prev Topic | Next Topic >>
Author Comment
StarkVanCool
Junior tube assistant
Posts: 1
(4/2/04 11:54 am)
Newbie Question - Combining Outputs
--------------------------------------------------------------------------------
Sorry if this is a simple question. I have a old Magnavox stereo class AB with 6v6's. Would like to combine the outputs for mono operation. Doable, cautions, mods, etc?
Thanks, SVC
Tiny Daddy
I will work on all amps
Posts: 595
(4/2/04 12:05 pm)
Re: Newbie Question - Combining Outputs
--------------------------------------------------------------------------------
Attempts to wire the output transformer secondarys together may not prove satisfactory.
Alternately you could drive 2 speakers, one off each output. Some prefer stereo guitar and stereo effects. Or maybe install a single larger output transformer and modify the circuit for quad 6V6 or a pair of 6L6.
Anyway for a good sound you will likely need to modify the circuitry so it's more "Fender-ish".
StarkVanCool
Junior tube assistant
Posts: 2
(4/2/04 6:55 pm)
Re: Newbie Question - Combining Outputs
--------------------------------------------------------------------------------
I plan on driving a Leslie 122 for a Hammond organ. I may attemt a bi-amp situation.
cheers, SVC
<< Prev Topic | Next Topic >>
Topic Commands
Click to receive email notification of replies
jump to: Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)
- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -
Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.