Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => AmpTools/Tech Tips => Topic started by: rafe on July 29, 2026, 04:48:05 pm
-
picked one up today for $10 mostly original , but some molestation has taken place. Fuse was removed...socket and all, line connected direct and masking taped for safety??? A few connections were disconnected looked accidental cold solder joint and slip on male fitting plus a couple more. Over all seems like a recap should set it on the road to usefulness. I have the schematic It has a few 1000v caps, I'll have to double up 500's .I have a Beckman 9022. that needs some work but it might be above my skill level or patience level....And I believe the Eico will do everything I need to do with one. Any and all feedback is welcome and helpful. One of the 12au7's is a Mullard so it was $10 well spent .