Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => EZ Board postings => Topic started by: Geezer on June 18, 2005, 06:29:37 am
-
Hoffman Amplifiers
> Tube Amp Building - Tweaks - Repairs
> Hoffman Reverb - on / off switch
<< Prev Topic | Next Topic >>
Author Comment
thamar3
Junior tube assistant
Posts: 1
(4/12/04 10:55 pm)
Hoffman Reverb - on / off switch
--------------------------------------------------------------------------------
This is my first electronics project, so this is probably an extremely dumb question. Nevertheless, here goes:
I am building a Hoffman Reverb and the switch in the diagram sure looks like a double pole singe throw switch. However, on the parts list it is shown as spst switch. Am I missing something here? My friend has the '63 Fender Reissue and it looks like a spdt switch to me.
Help!!!
GroundhogKen
Forum Moderator
Posts: 2347
(4/13/04 8:27 am)
Re: Hoffman Reverb - on / off switch
--------------------------------------------------------------------------------
I moved this post over from the Archive forum.
Ken
EL34
I got your parts right here.
Posts: 2270
(4/20/04 3:28 pm)
Re: Hoffman Reverb - on / off switch
--------------------------------------------------------------------------------
The power switch is spst on most reverb units.
All you have to do is turn on and off the hot black wire from the power cord.
The white power cord neural wire can stay hooked to the transformer full time.
Fender re-issure reverb units may have dpst switch but you don't have to use one of those.
thamar3
Junior tube assistant
Posts: 2
(4/20/04 4:54 pm)
Re: Hoffman Reverb - on / off switch
--------------------------------------------------------------------------------
Thanks
<< Prev Topic | Next Topic >>
Topic Commands
Click to receive email notification of replies
jump to: Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)
- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -
Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.