Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => EZ Board postings => Topic started by: Geezer on June 17, 2005, 08:30:58 pm
-
Hoffman Amplifiers
> Tube Amp Building - Tweaks - Repairs
> Convert a JTM45 Clone to a 50 watt Plexi Clone?
<< Prev Topic | Next Topic >>
Author Comment
Jotovibe
Junior tube assistant
Posts: 55
(2/3/04 12:15 am)
Convert a JTM45 Clone to a 50 watt Plexi Clone?
--------------------------------------------------------------------------------
How feasable is it to change a JTM45 circuit to a 50 watt plexi circuit?
Moosehead2
Junior tube assistant
Posts: 33
(2/4/04 6:08 pm)
Re: Convert a JTM45 Clone to a 50 watt Plexi Clone?
--------------------------------------------------------------------------------
Change the power tubes to EL34's and rebias.
<< Prev Topic | Next Topic >>
Topic Commands
Click to receive email notification of replies
jump to: Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)
- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -
Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.