Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => AmpTools/Tech Tips => Topic started by: JayB on December 22, 2008, 05:22:04 pm

Title: ExpressPCB to make transfers for pcb
Post by: JayB on December 22, 2008, 05:22:04 pm

I was just messing around with this today and realized you can make transfers for pcb's. Print them out on transfer paper using your printer and iron on to the pcb. Then etch away. I haven't done any yet but I printed out a circuit and laid out all my parts on the print out and they actually all fit perfectly.  ;)

Title: Re: ExpressPCB to make transfers for pcb
Post by: G._Hoffman on December 22, 2008, 11:17:13 pm

Just make sure to put all your traces and text on the back side of the board, or it will be backwards when you make your transfer.  I've done about 4-5 boards that way now.


Gabriel

Title: Re: ExpressPCB to make transfers for pcb
Post by: JayB on December 24, 2008, 03:38:12 pm

I didn't get that far yet but I'm planning on it.

Have you seen this yet?

http://tech.groups.yahoo.com/group/expresspcb/

Join up and they have a lot of custom components to use.