Hoffman Amplifiers Tube Amplifier Forum

Other Stuff => Solid State => Topic started by: rzenc on April 24, 2009, 01:49:17 pm

Title: LED orientation
Post by: rzenc on April 24, 2009, 01:49:17 pm

Hi....smoked-mind question... :D

The LED has 2 legs...one bigger than the other...which one should I connect to ground??? I.m trying to install a relay based distortion...actually the *umble OD stage...

Thanks in advance

Best Regards

Rzenc

Title: Re: LED orientation
Post by: Iannone on April 24, 2009, 02:41:21 pm

The shorter lead is the cathode, and that one goes to ground (or the lower voltage connection) in a DC circuit.

Title: Re: LED orientation
Post by: rzenc on April 24, 2009, 02:52:17 pm

THANKS!!!!!!!!!!!!!!!!!!!!!!!


BEST REGARDS

RZENC