Hoffman Amplifiers Tube Amplifier Forum

Other Stuff => Guitars => Topic started by: TheElectricMoron on August 20, 2009, 01:48:47 pm

Title: Fender Performer Wiring Q
Post by: TheElectricMoron on August 20, 2009, 01:48:47 pm

I recently got this Fender Performer - been wanting for a loooong time. Anyway, the electrics have been pretty much bruuutiliiized!  :cry:  Not to dwell on that too much but there is no evidence of what the stock set up might have been. I THINK that two of the six!!! dpdt switches were part of the original cast. Past that I dunno.

So if anyone happens to have or knows where to get a wiring diagram for this thing I certainly appreciate knowing too.

I already hit Fender and Fender Japan.

TIA

Charlie

Title: Re: Fender Performer Wiring Q
Post by: tubesornothing on August 20, 2009, 03:06:26 pm

Well, if you can't finda schemo for it, one could be put together.  List what the pickups are and what knobs/switches you have. 

Some other places to look: fender discussion pages, seymour duncan (look for a generic schematic)

Title: Re: Fender Performer Wiring Q
Post by: TheElectricMoron on August 22, 2009, 12:53:18 am

There actually isn't enough in there that is identifiably original to even make a guess.

HOWEVER

Ed Treat of Fender USA consumer relations answered my email and sent me the goods.  For free !   Hooray for Ed !!!!

I knew there was a reason that Fenders appealed to me.  Now I have another.

Thanks again to Ed

Charlie