Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => EZ Board postings => Topic started by: Geezer on June 17, 2005, 08:50:48 pm
-
Hoffman Amplifiers
> Tube Amp Building - Tweaks - Repairs
> Galvanized Chassis...
<< Prev Topic | Next Topic >>
Author Comment
stratavox
Junior tube assistant
Posts: 24
(2/10/04 7:26 am)
Galvanized Chassis...
--------------------------------------------------------------------------------
Anyone used one of Doug's galvanized 5E3 chassis? Pros/cons ? Just curious...
Moosehead2
Junior tube assistant
Posts: 39
(2/10/04 10:26 am)
Re: Galvanized Chassis...
--------------------------------------------------------------------------------
Just make sure you use the fender style tube sockets because the ceramic ones don't fit.
<< Prev Topic | Next Topic >>
Topic Commands
Click to receive email notification of replies
jump to: Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)
- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -
Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.