Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => PC Express and JSchem - Schematics and Layout diagrams => Topic started by: Pappie on November 27, 2009, 05:48:47 pm

Title: Hoffman 100w Plexi with Hotswitch please check for errors
Post by: Pappie on November 27, 2009, 05:48:47 pm

Hey Guys,

Here's my first schematic, it's of Doug's Plexi 100 with hotswitch.
Yes, I cheated a little by looking at a Marshall schematic and Doug's layout.
(to bad I couldn't copy and paste!)

I've not found a schematic of Doug's 100w Plexi here, I guess everyone uses the layout,
which is great, but I want a schematic for my amp. After drawing the schematic (me being an old newbie), things just seem a little clearer now! :huh:

Would you guys please check it out, to see if I've left anything out, made mistakes
or whatever.

I'd like to write my voltages in, but I want to be confident that it's a good schematic!

Thanks, Pappie
 

Title: Re: Hoffman 100w Plexi with Hotswitch
Post by: Pappie on November 28, 2009, 03:25:11 pm

Updated, with most of the voltages!

Thanks Pappie