Hoffman Amplifiers Tube Amplifier Forum
Other Stuff => Guitars => Topic started by: Jennings on March 09, 2010, 03:35:13 pm
-
Does anyone know if you can get a Strat with two humbuckers and a Floyd Rose? All I've seen so far is a HSS model, and they're about £800 over here in the UK. There're so many models though something might have slipped under my radar!
Failing that, I'll happily build it myself out of bits...so can anyone recommend a source of a nitro sprayed Strat HH body routed for a Floyd Rose? I'd prefer to find something in the UK if I can to keep costs down.
-
Well, they USED to, the Floyd Rose Classic Stratocaster HH, but I can only find it in the support section, so I would guess it has been discontinued.
Don't bother with Nitro, by the way. It's fine stuff, but there is nothing at all wrong with modern finishes, and I promise you will never hear a difference. Ever.
Gabriel
-
Thanks for the tip off about the discontinued model...I'll keep my eyes peeled for one if I can find one lurking about secondhand somewhere. I agree on the finish material...I've finished my own guitars in a wide variety of stuff to good effect. I just has a vision of something in a lovely old style 3-colour sunburst, but with the floyd and HH pickups...somehting that had the look of an old guitar that had been modified like that. Looks like my best bet is just to pick up a Mexican or Japanese model on the cheap and maybe try and drill it out myself and adjust the nut accordigly too. Unless I can find a decent source appropriately drilled bodies, and I can always buy a floyd fitted neck too. Allparts seem to have a much lower number of body types than they used to...at least here in the UK. I also found www.arranzguitars.com and might see what they can do for me. Are the Warmouth bodies any good? They seem to cost quite a bit by comparison.
-
Thanks for the tip off about the discontinued model...I'll keep my eyes peeled for one if I can find one lurking about secondhand somewhere. I agree on the finish material...I've finished my own guitars in a wide variety of stuff to good effect. I just has a vision of something in a lovely old style 3-colour sunburst, but with the floyd and HH pickups...somehting that had the look of an old guitar that had been modified like that. Looks like my best bet is just to pick up a Mexican or Japanese model on the cheap and maybe try and drill it out myself and adjust the nut accordigly too. Unless I can find a decent source appropriately drilled bodies, and I can always buy a floyd fitted neck too. Allparts seem to have a much lower number of body types than they used to...at least here in the UK. I also found www.arranzguitars.com and might see what they can do for me. Are the Warmouth bodies any good? They seem to cost quite a bit by comparison.
They aren't in the UK, so I didn't mention them, but both Warmoth and USA Custom Guitars make exceptional parts. They are quite a bit more expensive, but are well worth the extra cost. At the moment, I think USA Custom is doing slightly better work, though they don't have a license agreement with Fender, so their head stocks are slightly off, but it has never bothered me. Both companies do very fine finish work, as well, and at very reasonable costs. I couldn't beat their prices, that's for sure!
Gabriel
-
I like the look of the USA Custom Guitars stuff...just checked out their website. Prices don't look too bad either. Just the hefty UK import fees and subsequent taxes!