Hoffman Amplifiers Tube Amplifier Forum
Amp Stuff => EZ Board postings => Topic started by: Geezer on June 17, 2005, 09:02:23 pm
-
Hoffman Amplifiers
> Tube Amp Building - Tweaks - Repairs
> traditional voltages for Champ 5F1
<< Prev Topic | Next Topic >>
Author Comment
trescat
Junior tube assistant
Posts: 9
(2/14/04 2:26 am)
traditional voltages for Champ 5F1
--------------------------------------------------------------------------------
What are the traditional voltages expected to be for the B+ and the 6V6 power tube on a Tweed champ 5F1, as close to original voltages, when first produced?? TIA
Trevor
6G6
Junior tube assistant
Posts: 79
(2/14/04 8:20 am)
Re: traditional voltages for Champ 5F1
--------------------------------------------------------------------------------
The nearest I could find was a 5E1.
That shows 305V for the 6V6 and 150V for the 12AX7.
Man that thing is simple!
bluesbear
Hey get your own solder
Posts: 326
(2/14/04 10:27 am)
Re: traditional voltages for Champ 5F1
--------------------------------------------------------------------------------
The old official Fender layout for the 5F1 says:
295V for the 6V6
150V for the 12AX7
Fender was notorious for getting it wrong on paper. Take everything with a grain off salt. Anything fairly close would be just fine, anyway.
Dave
<< Prev Topic | Next Topic >>
Topic Commands
Click to receive email notification of replies
jump to: Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)
- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -
Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.