Hoffman Amplifiers Tube Amplifier Forum

Amp Stuff => Tube Amp Building - Tweaks - Repairs => Topic started by: worth on August 23, 2010, 10:49:36 am

Title: resistors in parallel ?
Post by: worth on August 23, 2010, 10:49:36 am

I'm out of 820 ohm resistors , ( Tweed Deluxe ). Would there be an undesirable effect on tone , ( voltage drop etc. ) if I paralleled two 1.5K resistors on the V1 cathode , or anywhere else in the circuit for that matter ?

Title: Re: resistors in parallel ?
Post by: phsyconoodler on August 23, 2010, 11:32:31 am

No problem at all.