Author Topic: Silvertone 1485 (Read 2845 times)

ginger · « **on:** December 09, 2018, 10:57:42 am »

I need to replace the screen resistors on the output tubes . The stock value is 68 ohms , which I never stock... any problem with using 100 ohms ?

sluckey · « **Reply #1 on:** December 09, 2018, 11:26:08 am »

no problem

ginger · « **Reply #2 on:** December 09, 2018, 11:37:22 am »

Ok , thanks

PRR · « **Reply #3 on:** December 09, 2018, 03:16:01 pm »

Silvertone would have done that, if they ran out of 68s.

sluckey · « **Reply #4 on:** December 09, 2018, 03:59:36 pm »

Silvertone would have done that, if they ran out of 68s.

Gibson too. But Gibson would not tell anyone!

shooter · « **Reply #5 on:** December 09, 2018, 04:48:32 pm »

Quote

Gibson would not tell anyone!

Including the poor draftsman doing the schematic

Welcome To the Hoffman Amplifiers Forum September 07, 2025, 05:11:38 am

Welcome, Guest. Please login or register. -User Name -Password
Home Help Search Login Register
Hoffman Amplifiers Tube Amplifier Forum » Amp Stuff » Tube Amp Building - Tweaks - Repairs » Silvertone 1485

Choose a link from the Hoffman Amplifiers parts catalog
Mobile Device Catalog Link	Yard Sale Discontinued	Misc. Hardware
What's New	Board Building Parts	Amp trim Handles
Lamps Diodes	Hoffman Turret Boards	Channel Switching
Resistors	Fender Eyelet Boards	Screws/Nuts Washers
Jacks/Plugs Connectors	Misc Eyelet Boards	Tools
Capacitors	Custom Boards	Tubes Valves
Pots Knobs	Fuses/Cords	Chassis
Tube Sockets	Switches	Wire Cable

Welcome To the Hoffman Amplifiers Forum