Hello Im Bert

[TigerTrading2021]

Hello Im Bert and have read this forum with great admiration for the tremendous knowledge here. I posted ealier about an Altec 342b and my post was removed. Can someone guide me on that?

[EL34]

Welcome to the Hoffman Amps forum

There are many different boards on this forum for different topics.

The Tube Amp Building - Tweaks - Repairs board is where you can post amp questions.

That board is listed here.
https://el34world.com/Forum/index.php?board=13.0

Thanks,
Doug Hoffman

[TigerTrading2021]

Doug I must be doing something wrong. I posted in that forum and the post dissapeared. Then tried to post again and there was nothing.

[sluckey]

That Altec post was corrupted somehow by the forum software. No message text was visible, yet I clicked reply and could see your message. I saved my reply and still could not see anything. So the message was deleted. Try a new post.

[TigerTrading2021]

I have tried numerous times and just keep getting nowhere. I can't attach my schematic either. I even tried another browser as I am using chrome. I can read all the other posts but have now tried about 7 times to post my topic

[sluckey]

Hoffman is aware. Your posts show up fine on this forum. Try a post without a pic. See if you can post in a different forum.

[TigerTrading2021]

Ok ty Sluckey will do

[TigerTrading2021]

My post in another thread worked just fine albeit with no pic as you suggested.

[sluckey]

I noticed in your Altec post that you had clicked "Insert Image" button but did not actually include a URL that pointed to the image file. Maybe that's a factor. The "Insert Image" button will not work if the file is on your computer. It must be on the net somewhere.

If you have a file on your computer that you want to share then use the "Attachments and other options" link that is located just beneath the text input area. There is a 2MB file size limit for each file.

[TigerTrading2021]

Ok thank You Sluckey. I did the post several ways. I also posted in that forum on the DC heater thread and it worked fine. Could you delete my other EQ post as it is meaningless? Also in that EQ post once again it has no picture but I can not even go to it and see any replies. Just a glitch somehow I guess. Im going to try once more on the Altec post but I have to word it different or the software tells me I already posted it.

[EL34]

Did you figure it out?

[TigerTrading2021]

Did you figure it out?

Yes Sir and the guys here were most helpful and only flamed my couple of dummie decisions with mild humor...LoL Thank You