Dumble input jack wiring?

[idsnowdog]

I built a MOSFET boost for a project.  The amp has two inputs and one of the jacks is supposed to be a switching type to turn it on when plugged into one of the inputs.  However,  I don't see a schematic showing how to wire open frame jacks. 

[idsnowdog]

I see the wiring for enclosed jacks but not open jacks.  This is the booster I built which is taken from the Nana schematic.

[WimWalther]

The open-frame aka wafer-style jacks don't have the same switch configuration as do the plastic type.

They are not direct substitutes.

[acheld]

This might help.

Added:  Green goes to FET bd input
            Blue is the FET signal out

[idsnowdog]

Thanks that clarifies many things.