1980 peavy foot switch

[Snake5150]

I have a 1980 peavy deuce vt. I’m attempting to rebuild the foot switch I don’t have. I have gotten the reverb and phaser on off switches to work, but can’t for the life of me figure out the channel selector combiner switches.

It has a 6 pin din socket. I’m pretty sure I have pinned it out correctly. I believe a din socket is 1-5 going clockwise. So the cable end pin out is reversed. The alignment notch is at the bottom. I have the schematic for the amp with their crummy foot switch wiring for reference. At the bottom of page 2 I believe. Thank all.

[sluckey]

their crummy foot switch wiring for reference.

Their crummy foot switch wiring looks simple and straightforward to me.

[Snake5150]

their crummy foot switch wiring for reference.

Their crummy foot switch wiring looks simple and straightforward to me.

My frustration got ahead of me with that statement. I’m pretty convinced that I have the pinout wrong. Or am maybe using the wrong type of switch. I am using 1 side of a dpdt as the switches. I think the first switch might need to be different. I’ve also come across supposed pinouts that don’t seem to match.

[sluckey]

The selector switch must be a SPDT and the other switches are just SPST. You could use four DPDT switches for all.