100 watt plexi cap wiring

[taylorc315]

Does anyone have pics of how the caps in 100 watt hoffman plexi are wired? Having trouble as to where on the board they all go. Thanks

[EL34]

Hi, you  need to post in the correct board
I'll move you pots to the correct board

[sluckey]

Does anyone have pics of how the caps in 100 watt hoffman plexi are wired? Having trouble as to where on the board they all go. Thanks

The caps are probably not actually mounted on the Hoffman board. Some of them 'may' be located along the edge of the board. You'll have to work with both of these drawing...

     http://el34world.com/Hoffman/images/Plexi100Old.gif
     http://el34world.com/charts/images/M100.gif

Marshall used six 50/50 cap cans. Five of the cap cans have the two 50µF sections connected together to get 100µF total. This makes for a very tidy layout. Here's a layout that shows that style. The board is different from the Hoffman board so you would have to adapt.

     http://sluckeyamps.com/misc/2203_MV_Layout.pdf

[taylorc315]

Thanks Sluckey, That's what was confusing me, the amount of caps used in this build and which ones that needed to be connected together.