Eico 460

[rafe]

picked one up today for $10 mostly original , but some molestation has taken place. Fuse was removed...socket  and all,  line connected direct and masking taped for safety??? A few connections were disconnected looked accidental cold solder joint and slip on male fitting plus a couple more. Over all seems like a recap should set it on the road to usefulness. I have the schematic  It has a few 1000v caps, I'll have to double up 500's .I have a Beckman 9022. that needs some work but it might be above my skill level or patience level....And I believe the Eico will do everything I need to do with one. Any and all feedback is welcome and helpful. One of the 12au7's is a Mullard so it was $10 well spent .