Author Topic: L pad passive attenuator (Read 962 times)

Snake5150 · « **on:** February 28, 2025, 05:58:49 pm »

Will a 50w jtm really fry a 100 w rms Lpad or is what I read a specific case of one off ness

Merlin · « **Reply #1 on:** February 28, 2025, 06:25:36 pm »

Yes it can fry it. The 100W rating on the LPad is peak power, not continuous.

Snake5150 · « **Reply #2 on:** February 28, 2025, 06:26:51 pm »

Yes it can fry it. The 100W rating on the LPad is peak power, not continuous.

Well shit.
So a mv it is

Merlin · « **Reply #3 on:** February 28, 2025, 06:28:20 pm »

This is why we have dummy loads on big heatsinks!

Welcome To the Hoffman Amplifiers Forum September 06, 2025, 12:38:29 pm

Welcome, Guest. Please login or register. -User Name -Password
Home Help Search Login Register
Hoffman Amplifiers Tube Amplifier Forum » Amp Stuff » Tube Amp Building - Tweaks - Repairs » L pad passive attenuator

Choose a link from the Hoffman Amplifiers parts catalog
Mobile Device Catalog Link	Yard Sale Discontinued	Misc. Hardware
What's New	Board Building Parts	Amp trim Handles
Lamps Diodes	Hoffman Turret Boards	Channel Switching
Resistors	Fender Eyelet Boards	Screws/Nuts Washers
Jacks/Plugs Connectors	Misc Eyelet Boards	Tools
Capacitors	Custom Boards	Tubes Valves
Pots Knobs	Fuses/Cords	Chassis
Tube Sockets	Switches	Wire Cable

Welcome To the Hoffman Amplifiers Forum