Bias Wiggle Tremolo with 7591?

[dwinstonwood]

Hey again, another question.
Everything I read about the 7591 says it's an easy tube to drive, like an EL84 or 6V6.
I've had great success using Bias Wiggle Tremolo with those two tubes. Shouldn't it work well with 7591's, too?
If not, do I really need to go with the AB763 Roach?

Thanks!
David

[SEL49]

Works very well. Look at this...

     https://sluckeyamps.com/hammond_2/AO-63.pdf

Should work fine with cathode bias too.

[dwinstonwood]

Thanks SEL49!

And, thanks for the schematic. I'm actually planning on using a Cathodyne PI, too!

David

[Sonny ReVerb]

I used a Princeton Reverb trem with a 7591 PP fixed bias power section. It works very well.

[dwinstonwood]

I used a Princeton Reverb trem with a 7591 PP fixed bias power section. It works very well.

Interesting, my initial "schematic-sketch" resembles a PR front end. I didn't intend it to.