Anybody know where to find a SR chassis layout pri

[Geezer]

  Hoffman Amplifiers
    > Tube Amp Building - Tweaks - Repairs
        > Anybody know where to find a SR chassis layout print?      
 
<< Prev Topic | Next Topic >>  
Author  Comment  
Bluesguitarplayer56
Junior tube assistant
Posts: 57
(2/4/04 9:30 am)
 Anybody know where to find a SR chassis layout print?
--------------------------------------------------------------------------------
 Hi, looking for a BFSR chassis layout print, Weber has one on their site, but the thing is unreadable. Thanks.

Mike G.
 
GroundhogKen
Forum Moderator
Posts: 2240
(2/4/04 10:00 am)
 Re: Anybody know where to find a SR chassis layout print?
--------------------------------------------------------------------------------
 www.ampwares.com/ffg/sche...layout.gif

Is that better?


Ken
 
Bluesguitarplayer56
Junior tube assistant
Posts: 57
(2/4/04 12:30 pm)
 Thanks Ken, but looking for a chassis machining print...
--------------------------------------------------------------------------------
 Thanks Ken. Actually, I was not clear enough in my request. I'm looking for a chassis machining print. There is one on the Weber site, but it is so garbled that you can't read most of it. I can have a guy in the machine shop here at work machine out the PT cutout and tube socket holes for me on the milling machine. Not necessary, but would be nice to have.

Thanks again for your help.

Mike G.
 
Moosehead2
Junior tube assistant
Posts: 32
(2/4/04 2:30 pm)
 Re: Thanks Ken, but looking for a chassis machining print...
--------------------------------------------------------------------------------
 I was actually thinking of getting together drawings for the do-it-yourselfers. These would include accurate chassis and cabinet drawings for various amp models that you could hand to a cabinet maker or machine shop and have it fabricated. Of coarse this would be a lot of work so i would have to charge a small fee or else it wouldn't be worth it. I already have drawings for champs, brown supers, plexi heads. All the drawings i ever see on the net are mostly crap which fabricaters wouldn't be able to read properly. Of coarse i take the dimensions off of the real thing for accuracy. Would anyone be interested in this type of service?

Edited by: Moosehead2 at: 2/4/04 3:47 pm
 
 
 << Prev Topic | Next Topic >>

 

 Topic Commands
 Click to receive email notification of replies
  
jump to:  Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)    
 

- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -



Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.