Welcome To the Hoffman Amplifiers Forum

September 07, 2025, 03:45:53 pm
guest image
Welcome, Guest. Please login or register.
-User Name
-Password



Hoffman Amps Forum image Author Topic: Just getting started at this  (Read 1986 times)

0 Members and 1 Guest are viewing this topic.

Offline eternalpurple

  • Level 1
  • *
  • Posts: 22
  • I love Tube amps
Hoffman Amps Forum image
Just getting started at this
« on: December 09, 2017, 10:46:53 pm »
And I'm finding out some things.
  1. Getting set up and buying your first round of parts can get expensive.
  2. Buying capacitors in sets off of ebay you can expect that very few will have the voltages required for tube amps.
  3. Expect to do some serious reading before you build and that is just to have a rudimentary understanding.
  4. At 62 reading and trying to maintain a rudimentary understanding is harder than it used to be.
  5. Never leave your soldering on and prop up against something because your coming right back.
  6. That physicists with all their knowledge still don't know their @ss from a good grade of sauerkraut.
 
And a question...............If currant does indeed flow - to + wouldn't that mean a resistor is an enhancer? If so by what means does it achieve it?

Offline PRR

  • Level 5
  • *******
  • Posts: 17082
  • Maine USA
Hoffman Amps Forum image
Re: Just getting started at this
« Reply #1 on: December 10, 2017, 12:29:33 am »
> If currant does indeed flow - to + wouldn't that mean a resistor is an enhancer? If so by what means does it achieve it?

Numerical current flows + to -.

Electrons, being negative charges, flow - to +.

Resistors lose power. Batteries (and equivalent) give power.

eBay is mostly a terrible source for tube amp parts. There are much better sources.

Wait until your 2nd and 3rd rounds of parts-buying.

Offline 92Volts

  • Level 2
  • **
  • Posts: 385
  • I love Tube amps
Hoffman Amps Forum image
Re: Just getting started at this
« Reply #2 on: December 10, 2017, 02:52:36 pm »
And a question...............If currant does indeed flow - to + wouldn't that mean a resistor is an enhancer? If so by what means does it achieve it?

As PRR notes, electrons are negatively charged meaning their movement is opposite from current (in the standard way of representing current).

If you wanted, you could call electrons positive, but you'd also have to reverse positive/negative voltages if you did this... so you flip everything over, but the result behaves the same as it does now.

Offline eternalpurple

  • Level 1
  • *
  • Posts: 22
  • I love Tube amps
Hoffman Amps Forum image
Re: Just getting started at this
« Reply #3 on: December 10, 2017, 03:54:39 pm »
Thanks for the reply's. I actually placed a pretty good sized order at Hoffman about a week ago and I'm not through. The second buy thing is not good news but I'm going to do this.............It will just take a while. I've bought a few things from Mouser but navigating their web site makes it worth paying a little extra just to avoid the headaches it produces. Again....thanks for the reply's.

 


Choose a link from the
Hoffman Amplifiers parts catalog
Mobile Device
Catalog Link
Yard Sale
Discontinued
Misc. Hardware
What's New Board Building
 Parts
Amp trim
Handles
Lamps
Diodes
Hoffman Turret
 Boards
Channel
Switching
Resistors Fender Eyelet
 Boards
Screws/Nuts
Washers
Jacks/Plugs
Connectors
Misc Eyelet
Boards
Tools
Capacitors Custom Boards
Tubes
Valves
Pots
Knobs
Fuses/Cords Chassis
Tube
Sockets
Switches Wire
Cable


Handy Links
Tube Amp Library
Tube Amp
Schematics library
Design a custom Eyelet or
Turret Board
DIY Layout Creator
File analyzer program
DIY Layout Creator
File library
Transformer Wiring
Diagrams
Hoffmanamps
Facebook page
Hoffman Amplifiers
Discount Program