Welcome To the Hoffman Amplifiers Forum

September 07, 2025, 05:33:36 am
guest image
Welcome, Guest. Please login or register.
-User Name
-Password



Hoffman Amps Forum image Author Topic: Stumped - Marshall JMP 2203; Tube not conducting current  (Read 1910 times)

0 Members and 1 Guest are viewing this topic.

Offline BlackCrowe604

  • Level 1
  • *
  • Posts: 50
  • I love Tube amps
Hoffman Amps Forum image
Stumped - Marshall JMP 2203; Tube not conducting current
« on: February 15, 2021, 09:27:29 pm »
Hi All,

My JMP is making me scratch my head. Hoping someone may be able to provide some direction on this one. It has an additional preamp tube added, and a master volume. (4x) Preamp tubes & (4x) EL34s (V4 - V7).

I was running 4 bias probes, and V7 had 0Ma current. I proceeded to check voltages at tube sockets.

Initial Voltage Check @ Tube Sockets:

      1.   2.    3.     4.      5.     6.     7.   8.
V7. 0.   H.   499.  0.      -41.  NC.   H.   0
V6. 0.   H.   500.  500.  -41.  NC.   H.   0
V5. 0.   H.   500.  500.  -41.  NC.   H.   0
V4. 0.   H.   499.  500.  -41.  NC.   H.   0

So, from initial check, screen grid stuck out. Checked socket, it was missing, I replaced with 1Kohm.

After replacing 1Kohm screen grid, and measuring 1Kohm between pin 4&6, re-checked voltages, results below:

     1.   2.    3.     4.      5.     6.     7.   8.
V7. 0.   H.   493.  493   -41.  NC.   H.   0
V6. 0.   H.   494.  493.  -41.  NC.   H.   0
V5. 0.   H.   494.  493.  -40.  NC.   H.   0
V4. 0.   H.   494.  493.  -41.  NC.   H.   0

Pin 4 now has voltage. Awesome! However.....

I replaced tubes, let them run for a bit, then noticed through bias probes that yet again, V7 is not conducting current. 0mA.
I rechecked new resistor and measures 1K ohm.

Is there something I am missing here, or perhaps not considering? What else should I check?

Any help would be much appreciated.

I hope all is well despite the crazy times we are living in lately.

Cheers!



« Last Edit: February 15, 2021, 10:36:27 pm by BlackCrowe604 »

Offline sluckey

  • Level 5
  • *******
  • Posts: 5075
    • Sluckey Amps
Hoffman Amps Forum image
Re: Stumped - Marshall JMP 2203; Tube not conducting current
« Reply #1 on: February 15, 2021, 09:52:56 pm »
Screen resistor should be 1K, not 100K.
A schematic, layout, and hi-rez pics are very useful for troubleshooting your amp. Don't wait to be asked. JUST DO IT!

Offline BlackCrowe604

  • Level 1
  • *
  • Posts: 50
  • I love Tube amps
Hoffman Amps Forum image
Re: Stumped - Marshall JMP 2203; Tube not conducting current
« Reply #2 on: February 15, 2021, 10:35:49 pm »
Good catch, corrected.
Sorry, typo in post. Screen grids are all 1K. Replacement screen grid is also 1K.

Offline sluckey

  • Level 5
  • *******
  • Posts: 5075
    • Sluckey Amps
Hoffman Amps Forum image
Re: Stumped - Marshall JMP 2203; Tube not conducting current
« Reply #3 on: February 15, 2021, 10:53:42 pm »
Try a different bias probe with V7.

Do you measure zero ohms between V7 pins 1/8 and ground?
A schematic, layout, and hi-rez pics are very useful for troubleshooting your amp. Don't wait to be asked. JUST DO IT!

Offline BlackCrowe604

  • Level 1
  • *
  • Posts: 50
  • I love Tube amps
Hoffman Amps Forum image
Re: Stumped - Marshall JMP 2203; Tube not conducting current
« Reply #4 on: February 15, 2021, 11:24:30 pm »
V7 Pin #1 to ground = 0.22ohms
V7 Pin #8 to ground = 0.22ohms

new bias probe showing 19mA thru the tube!! thanks!!

will try the rest of the probes individually to confirm if one of the probes is causing errors.

 


Choose a link from the
Hoffman Amplifiers parts catalog
Mobile Device
Catalog Link
Yard Sale
Discontinued
Misc. Hardware
What's New Board Building
 Parts
Amp trim
Handles
Lamps
Diodes
Hoffman Turret
 Boards
Channel
Switching
Resistors Fender Eyelet
 Boards
Screws/Nuts
Washers
Jacks/Plugs
Connectors
Misc Eyelet
Boards
Tools
Capacitors Custom Boards
Tubes
Valves
Pots
Knobs
Fuses/Cords Chassis
Tube
Sockets
Switches Wire
Cable


Handy Links
Tube Amp Library
Tube Amp
Schematics library
Design a custom Eyelet or
Turret Board
DIY Layout Creator
File analyzer program
DIY Layout Creator
File library
Transformer Wiring
Diagrams
Hoffmanamps
Facebook page
Hoffman Amplifiers
Discount Program


password