Author Topic: Anyone ever incorporate an accutronics brick into their builds? (Read 2995 times)

joesatch · « **on:** March 22, 2022, 08:45:54 pm »

Thinking wiring one of these into a build with a reverb knob (maybe two to add decay and level). Would it go out into the phase inverter?

tubeswell · « **Reply #1 on:** March 22, 2022, 09:07:12 pm »

IIRC, TIMBO did this maybe in one of his builds a few years back. But my mind might be playing tricks with me.

uki · « **Reply #2 on:** March 22, 2022, 10:23:54 pm »

You'll like this !!

joesatch · « **Reply #3 on:** March 22, 2022, 11:01:30 pm »

Fabulous my man! I knew i came to the right place

TIMBO · « **Reply #4 on:** March 23, 2022, 04:30:08 am »

Hey mate,
It all started here...
Belton Reverb Brick (el34world.com)

A build using one. Works great.

6GW8 Parallel SE (el34world.com)

shooter · « **Reply #5 on:** March 23, 2022, 06:46:12 am »

I added a brick reverb to a build, worked great, directions were correct, although there were a couple, "thought provoking" moments

Welcome To the Hoffman Amplifiers Forum September 06, 2025, 01:23:07 pm

Welcome, Guest. Please login or register. -User Name -Password
Home Help Search Login Register
Hoffman Amplifiers Tube Amplifier Forum » Amp Stuff » Tube Amp Building - Tweaks - Repairs » Anyone ever incorporate an accutronics brick into their builds?

Choose a link from the Hoffman Amplifiers parts catalog
Mobile Device Catalog Link	Yard Sale Discontinued	Misc. Hardware
What's New	Board Building Parts	Amp trim Handles
Lamps Diodes	Hoffman Turret Boards	Channel Switching
Resistors	Fender Eyelet Boards	Screws/Nuts Washers
Jacks/Plugs Connectors	Misc Eyelet Boards	Tools
Capacitors	Custom Boards	Tubes Valves
Pots Knobs	Fuses/Cords	Chassis
Tube Sockets	Switches	Wire Cable

Welcome To the Hoffman Amplifiers Forum