How to make resistors look like resistors in DIYLC?

[Jonas Grumby]

Today is my first day using DIYLC. I’m working through a breadboard design of the EH Screaming Bird / Screaming Tree layout by Dcountry13. I wanted to know how to make my resistors look like resistors. I tried Color Code: 5 Band and 4 Band, and Shape: Tubular Beveled, but they just remain straight (red) lines. Also if you see anything wrong with this layout please let me know. Thanks!

[EL34]

Your spacing's are too close
Make the attachment points further apart

Like this

[Jonas Grumby]

Thank you. It's working now. Possibly because yesterday I specified that they were .5W resistors and then changed the value to .25W. Today I re-drew them as .25W and it worked.