Quick question about cat-res biasing... &nb

[Geezer]

  Hoffman Amplifiers
    > Tube Amp Building - Tweaks - Repairs
        > Quick question about cat-res biasing...          
 
<< Prev Topic | Next Topic >>  
Author  Comment  
rowka
Junior tube assistant
Posts: 8
(5/23/05 7:00 pm)
Reply  Quick question about cat-res biasing...
--------------------------------------------------------------------------------
 The 1 ohm resistor that gets placed on the cathode, can that be left there, or does it need to be removed?
 
MadSound50
Junior tube assistant
Posts: 19
(5/23/05 7:27 pm)
Reply  Re: Quick question about cat-res biasing...
--------------------------------------------------------------------------------
 The 1u resister to ground stays there . When you measure voltage across it millivolt's will = milliamps.
 
PHATamps
I only work on tube amps
Posts: 481
(5/23/05 7:29 pm)
Reply  Re: Quick question about cat-res biasing...
--------------------------------------------------------------------------------
 It can be left there. On Doug's layouts you'll see them on the board, integrated into the design.
 
rowka
Junior tube assistant
Posts: 9
(5/23/05 9:24 pm)
Reply  Re: Quick question about cat-res biasing...
--------------------------------------------------------------------------------
 Thanks folks. I really appreciate the help.
 
 
 << Prev Topic | Next Topic >>

  

 Topic Commands
 Click to receive email notification of replies
  
jump to:  Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)    
 

- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -



Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.