Peavey Classic 50 Wiring Help

[boxcarcut]

Hello Friends.

I recently changed the caps on my old Classic 50 and replaced the power tubes?

I'm not certain I have the transformer wires going to the correct spot.

I did not take any photos before hand and I'm having a heck of a time getting this amp back up and running.

Would someone be so kind to look at some photos I took and let me know if it's correct?

Thanks,
Tom

[Willabe]

Photo's?


           

[boxcarcut]

https://www.flickr.com/photos/34258368@N03/sets/72157651586519850/

I hooked it back and got very little sound out of it. I also can't find the proper schematic to check voltages.

Looking for some help

[mresistor]

Heres the schematic   http://el34world.com/charts/Schematics/files/peavey/peavey_classic50.pdf

Is the connector with the blue and brown wires the one that goes to the OT input? If so can it be inserted backwards/reversed? If so you could have reversed it and now it's out of phase.

[labb]

Check the ribbon cables connections very close

[mresistor]

Which transformer are you talking about? Using the schematic link I posted you should be able to check the voltages on the HVPS nodes; plate, screen, etc.