Recording/Headphone outputs

[hylaphone]

Hi folks, I've looking at implementing something like the attached schematic from Kagliostro, in a little micro amp I've built.
Will this still work if I have NFB fed from the secondary?
And do the recording and headphone outs pass full audio frequency? I'm not sure how to calculate that. If not, how would I scale up the components?Thanks very much!

[shooter]

does your uAmp pass full audio?
I did the math 40yrs ago, not gonna happen again 
Just looking, it'll probably pass whatever comes out of the amp

[hylaphone]

haha I don't blame you! Yes it's for bass guitar, 30Hz - 15kHzIf I have NFB coming from the secondary, will that be affected?

[nandrewjackson]

I'm guessing the thick black line that r80 is connected to us a ground? I've never seen it drawn that way before.

[shooter]

i seldom use NFB, so 


yes, ground

[PRR]

NFB should only make things better, why fear it? Though not a lot of NFB in a guitar amp.

The fat line between the jacks has to be Ground to work as expected.

Both output have high-cut filters. Raw/naked geetar has annoying highs. But you can switch-out the caps if you want "all of it", as when you have a fancier cab-sim in the system. (The coil won't make a lot of difference without the cap.)

[hylaphone]

AH! I see it now, thanks guys.