Legacy VL100 Head 25watts MOD

[Travis_W]

I really appreciate your time and just need an opinion/or how to on something....

I have the first Legacy VL100 Head which only switches down to
50-watts...the new Legacy II will switch down to 25 watts....

I want to MOD my amp so it can switch down to 25watts?? or is this possible
with no mods?? Do I just need to switch out the switch...hahaha you know
what I mean....

Thank you for your valuable time as it greatly appreciated.

Hope this is not an old question....could not find it on this site anywhere...

[Frankenamp]

search this site for threads using the term: "Geezer Switch" That may come up with sumthin'...

[VMS]

If you compare the schematics, you'll notice that the power switches work differently in Legacy and Legacy II.

http://www.carvinworld.com/crg/crg/schematics/VL100F.pdf

http://www.carvinworld.com/crg/crg/schematics/30-32201.pdf

In your amp the power switch turns off one pair of tubes.

In Legacy II the power switch reduces the supply voltage to phase inverter.

Manual says:

For early power tube saturation move this switch to 50 or 25 watts

but I think it should say early phase inverter tube saturation.