Traynor Bassmate yba-2a amp porn

[TubeGeek]

Had this amp come in for a service job this week.  Nice little amp.  I thought I'd share some more amp porn.

Replaced electrolytics and installed new 6v6's in the amp. Also rewired the ac power cord. I kept the original Mallory multi-cap in the chassis.  Figured I could just solder the new caps in place and leave the old one in.

[jjasilli]

 

[chocopower]

Those cleans chasis/layouts are like relaxing images for me.

Beatifull little amp!

[kagliostro]

Nice amp

the only thing I dislake
(and I would have removed and replaced with something else)
is the black piece of tape that holds the twisted wires 

Kagliostro

[LooseChange]

Classic clean Traynor layout. I've worked on a lot of old Traynors and they are nice to work on.
I always dump the cap can and install the new caps on the board just the way you did.  Nice job!

[eleventeen]

Always like to see a man with his solvents lined up!

[TubeGeek]

Nice amp

the only thing I dislake
(and I would have removed and replaced with something else)
is the black piece of tape that holds the twisted wires 

Kagliostro

Yeah it kind of bugged me too but it was there when it came to me so I left it there.

[TubeGeek]

Always like to see a man with his solvents lined up!

[TubeGeek]

Classic clean Traynor layout. I've worked on a lot of old Traynors and they are nice to work on.
I always dump the cap can and install the new caps on the board just the way you did.  Nice job!

Yeah these are nice amps. Since I moved to Canada and started accepting amp work I have been seeing more and more of these amps come in.  I like working on them just as much as Fender's.  I think they are very much like Fender's of the same era only Canadianized.  

[plexi50]

Nice amp. I have a chance to get another YSR1 Custom reverb. I may grab it