Power Amp Rewire (Plexi Gain 20 )

[TIMBO]

Hi guys, I was not sure how i should wire the power amp to be able switch between the two sets of tubes, so i wired it as per the first drawing and it works great. jeff posted another way of doing it with less wires (great, less wires is good) can i get an OK for this.Thanks

[sluckey]

Looks OK to me.

[TIMBO]

Thanks Sluckey, i had thoughts of flicking the ELs as both sets of tubes sounded pretty much the same (ELs sounded a little sharper) and the 6V6 were able to handle the higher voltages, but i thought "what the hell i'll just leave it as is and see what happens". Thanks