269ex and 125c with 2 x 6v6 liverpool success!! around 7 watts

[zambo]

Lucky 7 

Thank you PRR and all the other guys for helping figure this one out. I wondered if it could be done and it indeed can be done. A 7 watt ( more or less) Liverpool. Its not exactly a liverpool but rather my interpretation of a liverpool ( i dont care for el84's). I followed and express schematic till right after the PI caps. from there its 2 6v6's (220k grid leaks) 400R cathode unbypassed 1k5 screen resistors, 4k7 grid stop resistors. 11k5 OT primary into 8 ohm speaker. Could have built a better power supply. 33uf>220ohm>33uf>1k5>22uf>1k5>22uf. Second to last node feed both PI and GS 3. Hope this helps anyone interested and thanks again for all the input from you all.

[jojokeo]

Sounds nice, congrats! Crazy graphics hiding the pseudo "f" holes and couldn't make out where the pickup switch is. I'd like to hear the high gain w/ a solid body too. What 8" speakers are ya runnin' down below?

[TIMBO]

Good Stuff. 

[zambo]

Thanks! The pickup switch is right by the volume knobs and is on the neck for clean and bridge for dirty most of the time. Graphics ala sharpie oil pen! I had to draw the skulls eating the f holes. Just seems natural. I want to back light the f holes with a led inside...another day. The 8" speakers are celestions out of a boogie amp. Vintage 8's of some sort. They were paired with a vintage 30 12 at one point. I tried a les paul with this amp and it sounded good but was a little bright. It was a real 59 ( so cool ) that my friend has with the original pick ups. Coincidentally he owns the amp now. Thanks for looking!