Which Layout is Correct for AB763 Project (See image)

[coreysan]

Between the two layouts included, the top one shows underboard wires
going left of a 100K resistor, but the bottom layout shows the underboard
wires going to the right of the 100K.

Which one is right?

Thanks!
Corey

[sluckey]

I answered that exact question for you yesterday.

[guitardude57]

   wow...

[coreysan]

Sluckey - thank you for taking the time to respond. I assume from your
answer that I ticked you off a little because I asked the same question
twice.

I apologize, and I hope you will forgive me for that.

For guitardude57, what do you mean by "wow?" I take it from the gif
that you got annoyed too that I would ask the same question twice.

If you are as equally frustrated, then I hope you will forgive me as well.
I am a novice at this, so perhaps this is the wrong forum to learn from.

At any rate, thanks again for your answers, sluckey!
Corey

[sluckey]

Sluckey - thank you for taking the time to respond. I assume from your
answer that I ticked you off a little because I asked the same question
twice.

Not ticked off at all. I saw that you're new here and thought maybe you didn't get my answer in your original post. I was just prodding you to go look at my reply again. Most of my replies are short and direct and often that can be interpreted as grumpy or ticked off. That's not the case though. I tend to go silent if I'm ticked off.

Anyhow, the question was legit and the answer is still the same. Maybe Doug will see this post and fix that grey pic.