Hoffman Amplifiers
> Tube Amp Building - Tweaks - Repairs
> Add Effects loop to Doug's AB763 board
<< Prev Topic | Next Topic >>
Author Comment
Searing
Junior tube assistant
Posts: 67
(1/28/04 1:39 pm)
Add Effects loop to Doug's AB763 board
--------------------------------------------------------------------------------
Can I add an Effects Loop to Doug's AB763 board I have in my Fender Twin 65 reissue (was a reissue, now it is the amp I built, with all of your help of course) I want to preserve that direct tone and not lose it by going thru all of my pedals first! Thanks!
Chris
LooseChange
Senior tube assistant
Posts: 194
(1/28/04 5:37 pm)
Re: Add Effects loop to Doug's AB763 board
--------------------------------------------------------------------------------
I have been thinking of changing the tremolo circuit into a buffered effects loop. It would use both halves of the tremolo tube. I don't have a schematic yet, but I am looking. Any help??
Searing
Junior tube assistant
Posts: 67
(1/29/04 11:36 am)
Re: Add Effects loop to Doug's AB763 board
--------------------------------------------------------------------------------
I don't know of any schematics, but would love one. What about what Doug has on the H-50 in his amp section, would it be similar I wonder? Would this loop you are speaking of, using the trem. circuit, be just an in and out to go through your outboard effects?
Chris
Funkalicousgroove
Junior tube assistant
Posts: 3
(2/27/04 5:22 pm)
FX LOOP SCHEMATIC
--------------------------------------------------------------------------------
Go to
www.schematicheaven.com, click the link for rumble amps and look at the Dumbleator schematic. That's about the best circut for a buffered series effects loop I've seen, It will allow you to run stomp boxes in your Effects loop
<< Prev Topic | Next Topic >>
Topic Commands
Click to receive email notification of replies
jump to: Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)
- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -
Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.