Welcome To the Hoffman Amplifiers Forum

September 06, 2025, 07:43:54 am
guest image
Welcome, Guest. Please login or register.
-User Name
-Password



Hoffman Amps Forum image Author Topic: Using Old Test Gear...and the occasional Bonanza!  (Read 3629 times)

0 Members and 1 Guest are viewing this topic.

Offline teisco88

  • Level 1
  • *
  • Posts: 8
Hoffman Amps Forum image
Using Old Test Gear...and the occasional Bonanza!
« on: August 06, 2013, 05:42:16 pm »
I have been restoring some old boat anchor test equipment that's been laying around the shop for years--i.e., old signal generators, oscilloscopes, vtvms, etc.  I got my old Heathkit IO-18 'scope working again. It's perfectly adequate for working with amps.  Going to do the same with my even older Eico 460, just for giggles.  Anyway, I have some really old stuff that I decided not to restore, so I pulled it apart to see what I could salvage.  Whoa!  Christmas in August.  One old Heath Audio Analyzer contained nothing but old, essentially not used Mullard tubes.  12AX7, 12AU7, 12AT7, and a 6X4.  Another piece of gear that I had three of--a Heath signal tracer--also had a Mullard 12AX7.  Nice day for just popping open a couple of unused pieces of old gear.  The tubes test new on my gear.  Nice thing about old test gear--lots of guys built it and set it aside.  The "innards" are often _hardly_ used.  I don't need to tell you what those Mullard preamp tubes sell for, these days.  Hmm?  Maybe I will look inside some more of my old gear...

Say, does anyone else find it fun to work on vintage circuits _with_ vintage gear?  Now, if I could only find a way to purchase bottled Fullerton factory air to breathe while I build.  :think1:

Offline jjasilli

  • Level 5
  • *******
  • Posts: 6731
  • Took the power supply test. . . got a B+
Hoffman Amps Forum image
Re: Using Old Test Gear...and the occasional Bonanza!
« Reply #1 on: August 06, 2013, 06:31:37 pm »
 :headbang:

Offline eleventeen

  • Level 4
  • *****
  • Posts: 2229
Hoffman Amps Forum image
Re: Using Old Test Gear...and the occasional Bonanza!
« Reply #2 on: August 06, 2013, 08:41:23 pm »
It's only fun if the old test gear works sort of well. It is true that a 500Khz o'scope is essentially overkill for audio use...and might have been chucked out 30 years ago!

Yep, all that old Heathkit stuff used Mullard 12AX7s almost exclusively. And you're right....much of it has 20-50 hours burn time on it, if that!

Offline LHPcope

  • Level 1
  • *
  • Posts: 50
    • DCCable
Hoffman Amps Forum image
Re: Using Old Test Gear...and the occasional Bonanza!
« Reply #3 on: September 18, 2013, 03:27:03 am »
I have a Eico 460 that gets daily use along with a Leader discrete transistor signal generator from the 1970s.  The 460 is great for audio use.  I also have a Hickok 539A Tube tester that gets a fair amount of use.  I just wish I could find a "boat anchor" audio spectrum analyzer.

I also have built my own Maxwell/Wien bridge for measuring low Q inductors and my own Gauss meter. Both of these get a fair amount of use also.

 


Choose a link from the
Hoffman Amplifiers parts catalog
Mobile Device
Catalog Link
Yard Sale
Discontinued
Misc. Hardware
What's New Board Building
 Parts
Amp trim
Handles
Lamps
Diodes
Hoffman Turret
 Boards
Channel
Switching
Resistors Fender Eyelet
 Boards
Screws/Nuts
Washers
Jacks/Plugs
Connectors
Misc Eyelet
Boards
Tools
Capacitors Custom Boards
Tubes
Valves
Pots
Knobs
Fuses/Cords Chassis
Tube
Sockets
Switches Wire
Cable


Handy Links
Tube Amp Library
Tube Amp
Schematics library
Design a custom Eyelet or
Turret Board
DIY Layout Creator
File analyzer program
DIY Layout Creator
File library
Transformer Wiring
Diagrams
Hoffmanamps
Facebook page
Hoffman Amplifiers
Discount Program


password